Make your own clamps from pieces of batten or pallet wood, any length you like, using this sash clamp head from York.
Drill 13mm holes, 21mm on centre in from the edge at 100mm intervals to cover the capacities you'll need. The holes need to be positioned and drilled quite accurately for best performance.
A versatile and affordable option, ideal as a backup for situations where you only need to use very long clamps occasionally, or as a first set while you establish which sizes of clamps you're going to need most often.
- Steel clamping and pressure head with quality zinc-plated spindle
- Tackle with riveted end pieces
- Powder coated surface finish
- Tr 16×4 spindle
- Stroke: 120 mm
- M12 safety nut
- Made in Czechia
Note: wooden bar is not supplied - for illustration only.
