£91.40 when bought individually
Set includes:
Workshop Heaven Suede Scraper Wallet
Handmade in France from supple split leather, these beautiful wallets have three internal PVC flaps to protect the edges of your card scrapers from damage.
Capacity for up to 4 scrapers.
- Length: 178mm (7.00") approx
- Width: 104mm (4.09") approx
- Depth: 0.07mm (0.0027") approx
ARNO Carbur 2 Solid Carbide Burnisher
The Carbur 2 is flat out the fastest and most effective means of sharpening a cabinet scraper I have ever used.
One polished carbide rod is cylindrical and functions like a normal burnisher, the other is triangular with a tiny radius on the edge which intensifies the pressure, ideal for thick scrapers and scraper plane irons where a more aggressive cutting burr is desirable. Both are extremely efficient so you get better results in less time and with much greater control.
The sturdy cast aluminium handle incorporates twin guards, to help keep your fingers away from the sharp edge of the scraper.
Supplied with comprehensive instructions and a nice leather wallet.
Leather colour may vary.
ARNO Cabinet Scraper Set
For removing old finishes, cleaning up marks left by machine tools, levelling across joints and heavy stock removal (80 grit sandpaper jobs), reach for the stiff 1mm thick scraper.
For preparing flat or convex surfaces to receive finishing products (180 to 400 grit sanding jobs) the flexible 0.6mm scraper will give a superior surface in considerably less time than going through all the grits.
The finer more flexible 0.4mm takes it to the next stage and for finishing boards.
Last but not least is the gooseneck, shaped like a French curve to fit a wide range of profiles it allows you to scrape finish mouldings and curved pieces or gently clean up flaws in finished surfaces for repair work without marring the surrounding surface.
Contains:
- 1.0mm rectangular scraper - for heavier work, removing glue and old finishes
- 0.6mm rectangular scraper - for medium/general work
- 0.4mm rectangular scraper - for finishing boards and chasing small patches of tearout in a planed surface
- 0.6mm gooseneck scraper - for finishing concave surfaces
