null Skip to main content

Quangsheng Low Angle Rebating Block Plane (Type 3)

$169.00
Adding to cart… The item has been added

The Quangsheng Low Angle Rebating Block Plane has the advantage of being able to reach right into an internal corner. Think of it as a broad, comfortable shoulder plane rather than a block plane with added versatility, and you won't go far wrong.

What is a rebating plane used for?

The open-sided design makes it particularly useful for cleaning up rebates, trimming the bottoms and sides of housings and refining the shoulders of joints. It is also handy for working into corners where the body of a conventional plane would get in the way. In practice, it makes a useful companion to a router or saw, allowing you to take fine shavings to bring a rebate or joints to a precise fit.

Blade geometry

The blade is bedded at 12° and supplied with a 25° bevel, giving an effective cutting angle of 37°. This low cutting angle makes it well suited to end grain and general trimming work.

The blade is made from T10 carbon steel and hardened to RC60–63.

Construction

Open-sided planes are inherently less rigid than their closed-sided counterparts. The body doesn't have the same continuous U-shaped structure to resist the pressure of clamping the blade, so care is needed when tightening it. Just enough pressure to hold the blade securely is all that's required; there's no advantage in overtightening it.

Specifications

  • Blade material: T10 carbon steel
  • Blade hardness: RC60–63
  • Blade bevel: 25°
  • Bedding angle: 12°
  • Effective cutting angle: 37°
  • Sole dimensions: 165mm × 44mm (6½" × 1¾")
  • Cap: Bronze
  • Fittings: Brass

Replacement Iron

A replacement iron is available for this plane here.

Please note: We are unable to ship Quangsheng products to North America due to retail exclusivity restrictions.