Rakunandesu Replacement Blade Set for Anvil Pruning Shears
Raku Nandasu means "full of ease"! and the blade and anvil replacement process couldn't be easier.
The blade is held in by a single retaining screw, unscrew and it slides out forwards. Anvil is fitted tightly onto a sliding dovetail on top of the lower jaw, pry it off gently with a screwdriver and slide the replacement parts into place.
This Raku Nandasu pruning blade replacement set includes one cutting blade and one anvil.
Detailed replacement Instructions (Please wear gloves when replacing the blade to avoid danger):
1. With the shears closed, remove the cutting blade locking screw with a screwdriver or coin.
2. Open the shears and lower the cutting blade slightly toward the receiving blade, then slide it forward to remove it.
3. Insert a pointed object (4mm or less) such as a flathead screwdriver into the gap between the receiving blade and the body of the shears. With the shears closed, slide the receiving blade forward using the lever principle to remove it.
4. Slide the new receiving blade from the front until it fits securely.
5. Attach the new cutting blade to the back plate.
6. Hold the grip and lightly press the cutting blade against the receiving blade to secure it. Align the screw holes and tighten the screw with a screwdriver or coin.
*For safety reasons, please remove the cutting blade before replacing both the receiving blade and the cutting blade.
For detailed instructions, please watch the replacement video.
Detailed replacement Instructions (Please wear gloves when replacing the blade to avoid danger):
1. With the shears closed, remove the cutting blade locking screw with a screwdriver or coin.
2. Open the shears and lower the cutting blade slightly toward the receiving blade, then slide it forward to remove it.
3. Insert a pointed object (4mm or less) such as a flathead screwdriver into the gap between the receiving blade and the body of the shears. With the shears closed, slide the receiving blade forward using the lever principle to remove it.
4. Slide the new receiving blade from the front until it fits securely.
5. Attach the new cutting blade to the back plate.
6. Hold the grip and lightly press the cutting blade against the receiving blade to secure it. Align the screw holes and tighten the screw with a screwdriver or coin.
*For safety reasons, please remove the cutting blade before replacing both the receiving blade and the cutting blade.
For detailed instructions, please watch the replacement video.
Gyokucho copy
1. In a closed position, unscrew the screw on the blade using a screwdriver or a coin.
2. Slide the anvil out towards the tip of the anvil in an opened position. 3. Put a slotted screwdriver or something else that has a tip thinner than 4mm in between the anvil and the body, and slide it out to the direction of an arrow. ( You can also take the anvil out at the point of the triangle. )
4. Slide the new anvil in all the way to the end.
5. Put the new blade in the metal spine.
6. Grip the handles and close the anvil and put the screw back on the blade.
- Blade Overall Length: 83mm
- Blade Cutting Length: 40mm
- Blade Height: 20mm
- Blade Thickness: 1.4mm
- Blade Material: SK-5 Steel
- Anvil Length: 39mm
- Anvil Height: 7mm
- Anvil Width: 9.5mm
- Anvil Material: PA (Glass reinforcement)
- Made in Japan
https://www.yout-ube.com/watch?v=0AlRIpN_aNU&t=5s