Rakunandesu Replacement Blade Set for Anvil Pruning Shears
Raku Nandasu means "full of ease"! and the blade and anvil replacement process couldn't be easier.
The blade is held in by a single retaining screw, unscrew and it slides out forwards. Anvil is fitted tightly onto a sliding dovetail on top of the lower jaw, pry it off gently with a screwdriver and slide the replacement parts into place.
This Raku Nandasu pruning blade replacement set includes one cutting blade and one anvil.
Detailed Replacement Instructions (Please wear gloves when replacing the blade to avoid danger):
- With the shears closed, remove the cutting blade locking screw with a screwdriver or coin.
- Open the shears and lower the cutting blade slightly toward the receiving blade, then slide it forward to remove it.
- Insert a pointed object (4mm or less) such as a flathead screwdriver into the gap between the receiving blade and the body of the shears. With the shears closed, slide the receiving blade forward using the lever principle to remove it.
- Slide the new receiving blade from the front until it fits securely.
- Attach the new cutting blade to the back plate.
- Hold the grip and lightly press the cutting blade against the receiving blade to secure it. Align the screw holes and tighten the screw with a screwdriver or coin.
*For safety reasons, please remove the cutting blade before replacing both the receiving blade and the cutting blade.
For detailed instructions, please watch the blade replacement video (It's in Japanese, but is easy to follow).
- Blade Overall Length: 83mm
- Blade Cutting Length: 40mm
- Blade Height: 20mm
- Blade Thickness: 1.4mm
- Blade Material: SK-5 Steel
- Anvil Length: 39mm
- Anvil Height: 7mm
- Anvil Width: 9.5mm
- Anvil Material: PA (Glass reinforcement)
- Made in Japan